Forks Cone Valve


MXMA 48mm Cone Valve Fork
With current MX and Offroad forks a lot of compression damping is required; to create better comfort suspension tuners concentrate on changing the check valve setting. Check valve settings are a compromise between “enough comfort” v’s “enough damping”. Cone Valve forks utilize a Cone Valve system in place of the traditional shim type Check Valve set up.

SKU: N/A Category:


The Benefits of using a Cone Valve as the Check Valve:
• WP Cone Valve can always open further which reduces harshness
• More comfort when using harder set-ups
• No shims are used preventing any loss of damping from bent shims*
(*note pistons and shims are still utilized for Rebound control and in the C/A Compression)
• No sealing surface so minimum drop of pressure after valve opens
• Compression and Rebound clicker adjustments are adjustable from the outside

The WP Cone Valve has a unbeatable individual progressive damping behavior with setting options for the range of compression and rebound. The kit is supplied from WP without springs or oil, Factory Connection will Revalve and spring for your weight, height and needs

Cone Valve Fork Kit

*Note Factory Connection Springs might be needed if the correct spring rate is not available from WP at the time of purchase.

Applications – KTM, Husqvarna, Husaberg, Honda, Kawasaki, Yamaha, Suzuki

Additional information

Weight 1 lbs