2017-19 KXF250 Pull Rod

$224.95

Factory Connection has developed a Pull Rod for the 2017-19 KX250F. The Factory Connection Pull Rod is longer than the OEM Pull Rod and comes with OEM bearings and seals pre-installed.

With the Factory Connection Pull Rod drive through square edge acceleration chop is greatly improved especially when the rider is sitting. The bike is more settled in the turns and it follows the shallow ruts better.

By flattening the linkage curve the deep-in-the-stroke performance is greatly improved and the transition from mid stroke to bottoming is smoother

The Factory Connection Pull Rod does not require a specific setting change in the shock. It can be used with the OEM valving, for best results a Factory Connection Revalve is recommended in-conjunction with the Factory Connection Pull Rod.

SKU: PULLRODk01BLACK Category:

Description

Factory Connection has developed a Pull Rod for the 2017 KX250F. The Factory Connection Pull Rod is longer than the OEM Pull Rod and comes with OEM bearings and seals pre-installed.

With the Factory Connection Pull Rod drive through square edge acceleration chop is greatly improved especially when the rider is sitting. The bike is more settled in the turns and it follows the shallow ruts better.

By flattening the linkage curve the deep-in-the-stroke performance is greatly improved and the transition from mid stroke to bottoming is smoother

The Factory Connection Pull Rod does not require a specific setting change in the shock. It can be used with the OEM valving, for best results a Factory Connection Revalve is recommended in-conjunction with the Factory Connection Pull Rod.

Additional information

Weight 3 lbs